Routing by hand is tedious and time-consuming. Select what to connect and get several clash-free routes, ranked by length and fittings, then place the best as native Revit pipe and fittings.
Route plumbing pipes 10x faster inside Revit.
A Revit add-in that routes pipes for you, clash-free, using your own families, on projects of any size.
- Clash-free against linked models
- Native Revit pipe and fittings
- Your own pipe types and families
- Revit 2022 to 2027
- Your model never leaves your machine
- Unlimited route generations
Every route it places clears what is already in the model: existing MEP elements and structure, including linked models. Far fewer clashes reach coordination.
A fixture moves or a duct gets in the way? Pick the ends again and get fresh routes instead of redrawing.
Real output
Routed by Plumbing Copilot.
Drainage, vent, domestic water and fire protection: routes the tool generated in Revit, shown as they were placed, pipe and fittings and all.
DrainageSink to a floor drain, offset round a beamP-trap · down the wall, under the slab
DrainageTwo floor drains into the side of a mainAll 45° · a wye each into the existing main
DrainageFloor drain into the side of an existing pipeTrap · all 45° · a wye into the pipe
DrainageShower into the top of an existing pipeP-trap · all 45° · a wye on top of the pipe
DrainageRoof drain down to a discharge outlet4" · round the beams · down beside a column
DrainageFloor drain to floor drain, under two beamsP-trap · all 45° · into the side of its trap
DrainageFloor drain under the slab into a mainTrap · all 45° · one bend and a wye
DrainageWall-hung urinal into the side of a mainP-trap · a 3.6 m run · a rolled sanitary tee
DrainageSink waste down into the side of a drainAll 45° · a diagonal run · a wye into the drain
VentVent from a drain into the side of a ventEnd to pipe · up 5 m · a junction on the vent
VentVent from a drain to the open end of a ventEnd to end · up 5 m · into the free outlet
VentLavatory vent up into the side of a ventEnd to pipe · all 45° · a tee in the ceiling void
VentVent from a drain up through the roofEnd to end · all 45° · up to the roof terminal
VentDrain vent into the side of a roof ventEnd to pipe · all 45° · a reducer and a wye
Fire protectionUpright sprinkler to sprinkler under a slabThreaded steel · reducing elbows · a 2.4 m run
Domestic waterFlush-valve supply from one WC to the nextFixture to fixture · two bends · a diagonal run
Recorded in Revit
Your standards in. Native pipe out.
Every route follows your pipe types, slopes and fittings, and lands as native Revit pipe you can edit like any other.
Try it
You set the rules. It follows them.
Slope, pipe length, clearance, fittings, and what to avoid. Change any setting and watch it route again.
A simplified plan running in your browser. In Revit, Plumbing Copilot routes in 3D with your project's pipe types and fittings.
Impact
Design weeks of routing in hours.
10x
Faster routing
Generate complete pipe routes in a fraction of the time it takes to draw them by hand.
90%
Fewer errors
Clash-free routes from the start, without costly rework and coordination delays.
3x
More productive
Your team leaves tedious drafting for high-value engineering and design.
Plumbing Copilot
$99/ seat / month
Billed annually.
Book a demoStarts with a live demo on a real project, then a guided trial on yours.
Pricing
Scale your engineering output, not your headcount.
One plan, priced per seat.
- Drainage, vent, domestic water and fire protection
- Unlimited routes on unlimited projects
- Revit 2022 to 2027, all updates included
- Team seats and central billing
- Email support
More than 20 seats? Volume pricing and custom onboarding. Contact sales →
FAQ
Frequently asked questions.
What is Pipeit?
Pipeit is the company. Plumbing Copilot is the first live Pipeit product, built to automate plumbing routing workflows directly inside Autodesk Revit.
What kind of time and cost savings can I expect?
Teams typically see a 10X reduction in routing time. By automating the design process and preventing clashes before they happen, you can turn weeks of manual drafting and clash resolving into hours, reducing project cost and increasing its quality.
What is Plumbing Copilot?
Plumbing Copilot is a Revit add-in that lets plumbing designers turn weeks of manual routing into hours of automated design.
Does Plumbing Copilot run locally on my machine?
Yes. Plumbing Copilot runs entirely locally within your Revit environment. Your project data and models never leave your machine unless you explicitly choose to share them with our support team.
Can I try Plumbing Copilot for free?
Yes. Contact our team to request trial access and we will get you set up.
What project sizes and types does it support?
Plumbing Copilot is built to handle everything from small residential layouts to massive, highly complex commercial and hospital projects. It works seamlessly across all project types and sizes.
Does it use my own Revit families and pipe types?
Yes. Plumbing Copilot works with your project's loaded pipe types, fittings, system types, and other Revit content to generate native elements.
Does it avoid clashes and route around obstacles?
Yes. The algorithm automatically detects and avoids clashing with elements in your current model and any linked models.
Can I edit the routes after they are generated?
Yes. The generated routes are native Revit pipe elements, not proprietary objects. Once placed, you can edit, extend, or delete them with standard Revit tools.
What elements can I connect with Plumbing Copilot?
You can connect any elements in the current model that have a pipe connector on them, such as pipes, pipe fittings, plumbing fixtures, FCUs, and other mechanical equipment.
See it route a real project.
A 30-minute call with the Pipeit team, routing live in a real Revit project.